| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 4037 OVERALL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
4.780 INCHES MINIMUM FIRST HOLE AND 4.812 INCHES MAXIMUM FIRST HOLE |
| AAJD |
THREAD CLASS |
3A |
| AAUB |
HOLE DIAMETER |
0.070 INCHES NOMINAL |
| AASB |
FASTENER LENGTH |
4.953 INCHES MINIMUM AND 5.000 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ANEE |
GRIP LENGTH |
4.296 INCHES MINIMUM AND 4.328 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| AASA |
THREAD LENGTH |
0.625 INCHES MINIMUM AND 0.704 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AAUR |
GRIP DIAMETER |
0.4362 INCHES MINIMUM AND 0.4367 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AHYM |
NOMINAL THREAD DIAMETER |
0.438 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| BQDM |
HOLE TYPE |
DRILLED |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |