| AAVH |
SHOULDER DIAMETER |
0.500 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
4.156 INCHES NOMINAL |
| AATK |
EYE INSIDE DIAMETER |
0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR AMS6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AATR |
SHANK LENGTH |
3.391 INCHES MINIMUM AND 3.438 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AASA |
THREAD LENGTH |
0.453 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4037 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AATP |
SHOULDER THICKNESS |
0.078 INCHES NOMINAL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.066 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| STYL |
STYLE DESIGNATOR |
ROUND, CLOSED W/SHOULDER |
| CTWF |
DISTANCE FROM THREADED END TO SHANK HOLE CENTER |
3.234 INCHES MINIMUM FIRST HOLE AND 3.266 INCHES MAXIMUM FIRST HOLE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| CWXM |
EYE OUTSIDE WIDTH |
0.500 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| AAUA |
EYE STOCK THICKNESS |
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |