| AASA |
THREAD LENGTH |
0.874 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 431 OVERALL |
| ANEE |
GRIP LENGTH |
2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
250.0 MICROINCHES TOP OF HEAD |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AAJD |
THREAD CLASS |
3A |
| AAUB |
HOLE DIAMETER |
0.070 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES NOMINAL FIRST HOLE |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES GRIP |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES THREADS |
| ASXK |
HOLE QUANTITY |
1 |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES BEARING SURFACE OF HEAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.890 INCHES MINIMUM FIRST HOLE AND 2.922 INCHES MAXIMUM FIRST HOLE |
| AAUR |
GRIP DIAMETER |
0.5611 INCHES MINIMUM AND 0.5616 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AASK |
HEAD STYLE |
HEXAGON |
| AHYM |
NOMINAL THREAD DIAMETER |
0.562 INCHES |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AATB |
WIDTH BETWEEN FLATS |
0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM |
| BQDM |
HOLE TYPE |
DRILLED |
| AASB |
FASTENER LENGTH |
3.140 INCHES MINIMUM AND 3.187 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |