| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AASA |
THREAD LENGTH |
0.609 INCHES MINIMUM AND 0.688 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.734 INCHES MINIMUM FIRST HOLE AND 1.766 INCHES MAXIMUM FIRST HOLE |
| AASU |
HEAD HEIGHT |
0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ANEE |
GRIP LENGTH |
1.296 INCHES MINIMUM AND 1.328 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAUB |
HOLE DIAMETER |
0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASK |
HEAD STYLE |
HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| BQDM |
HOLE TYPE |
DRILLED |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AASB |
FASTENER LENGTH |
1.937 INCHES MINIMUM AND 1.984 INCHES MAXIMUM |
| AATB |
WIDTH BETWEEN FLATS |
0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |