| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| AASB |
FASTENER LENGTH |
4.812 INCHES NOMINAL |
| AATB |
WIDTH BETWEEN FLATS |
1.499 INCHES MINIMUM AND 1.503 INCHES MAXIMUM |
| CFSG |
NONSTANDARD THREAD PITCH DIAMETER |
+0.9500/+0.9536 INCHES |
| CQFM |
HARDNESS RATING |
37.0 ROCKWELL C MINIMUM OVERALL AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| AASA |
THREAD LENGTH |
0.812 INCHES MINIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNS |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.498 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.138 INCHES MINIMUM FIRST HOLE AND 0.145 INCHES MAXIMUM FIRST HOLE |
| CMLP |
THREAD QUANTITY PER INCH |
14 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL |
| AASK |
HEAD STYLE |
HEXAGON |
| STYL |
STYLE DESIGNATOR |
CONCENTRIC HOLE UNTHREADED |
| AHYM |
NOMINAL THREAD DIAMETER |
1.000 INCHES |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
4.595 INCHES NOMINAL FIRST HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AASU |
HEAD HEIGHT |
0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |