| FEAT |
SPECIAL FEATURES |
HEAD HAS 2 SLOTS 180 DEGREES APART 0.130 IN. MIN 0.140 IN. MAX W |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AASA |
THREAD LENGTH |
0.658 INCHES MINIMUM AND 0.718 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
2 |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AASK |
HEAD STYLE |
HEXAGON |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| AASU |
HEAD HEIGHT |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AATB |
WIDTH BETWEEN FLATS |
0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.307 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
3.428 INCHES MINIMUM AND 3.448 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |