| AASU |
HEAD HEIGHT |
0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AASB |
FASTENER LENGTH |
5.250 INCHES MINIMUM AND 5.280 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| ANEE |
GRIP LENGTH |
4.802 INCHES MINIMUM AND 4.822 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1108 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASA |
THREAD LENGTH |
0.428 INCHES MINIMUM AND 0.478 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8740 OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
5.117 INCHES MINIMUM FIRST HOLE AND 5.167 INCHES MAXIMUM FIRST HOLE |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AAUR |
GRIP DIAMETER |
0.0985 INCHES MINIMUM AND 0.0995 INCHES MAXIMUM |