| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AASU |
HEAD HEIGHT |
0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.500 INCHES MINIMUM AND 0.578 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
2.922 INCHES MINIMUM AND 2.953 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 431 OVERALL |
| AAJD |
THREAD CLASS |
3A |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAUR |
GRIP DIAMETER |
0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AASK |
HEAD STYLE |
HEXAGON |
| AASB |
FASTENER LENGTH |
3.453 INCHES MINIMUM AND 3.500 INCHES MAXIMUM |
| AATB |
WIDTH BETWEEN FLATS |
0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
3.281 INCHES MINIMUM FIRST HOLE AND 3.312 INCHES MAXIMUM FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |