| AASA |
THREAD LENGTH |
1.035 INCHES MINIMUM AND 1.082 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASU |
HEAD HEIGHT |
0.219 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3A |
| AAUB |
HOLE DIAMETER |
0.070 INCHES NOMINAL |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| AATB |
WIDTH BETWEEN FLATS |
0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ASXK |
HOLE QUANTITY |
3 |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.230 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON CORNERS |
| AASB |
FASTENER LENGTH |
1.265 INCHES MINIMUM AND 1.312 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| BQDM |
HOLE TYPE |
DRILLED |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |