| AASB |
FASTENER LENGTH |
0.578 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES NOMINAL FIRST HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| AATB |
WIDTH BETWEEN FLATS |
0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AAUR |
GRIP DIAMETER |
0.1483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.422 INCHES MINIMUM FIRST HOLE AND 0.453 INCHES MAXIMUM FIRST HOLE |
| AAWU |
SINGLE SHEAR STRENGTH |
4650 POUNDS PER SQUARE INCH |
| AASK |
HEAD STYLE |
HEXAGON |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASA |
THREAD LENGTH |
0.318 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |