| ZZZX |
DEPARTURE FROM CITED DESIGNATOR |
AS MODIFIED BY HEAD DIA. |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AASU |
HEAD HEIGHT |
0.750 INCHES NOMINAL |
| AASL |
HEAD DIAMETER |
1.040 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3A |
| AASB |
FASTENER LENGTH |
2.297 INCHES MINIMUM AND 2.327 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
BEVEL-CONICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| CQFM |
HARDNESS RATING |
34.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| ASDB |
WIDTH ACROSS FLATS |
0.563 INCHES MINIMUM AND 0.566 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| FEAT |
SPECIAL FEATURES |
THE TAPER OF THE HEAD STARTS 0.094 IN. FROM THE BEARING SURFACE,THE SMALL END OF THE TAPER IS 0.858 IN. TO THE END OF THE FIRST DIA. |
| AASA |
THREAD LENGTH |
1.037 INCHES MINIMUM AND 1.087 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |