| MATT |
MATERIAL |
STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 4037 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-B-6812 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| AASA |
THREAD LENGTH |
0.954 INCHES MINIMUM |
| CBBL |
FEATURES PROVIDED |
FINISHED HEAD |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AAJD |
THREAD CLASS |
3A |
| AAUB |
HOLE DIAMETER |
0.070 INCHES NOMINAL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES NOMINAL FIRST HOLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASU |
HEAD HEIGHT |
0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AASK |
HEAD STYLE |
HEXAGON |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.296 INCHES NOMINAL FIRST HOLE |
| AATB |
WIDTH BETWEEN FLATS |
0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON LONGITUDINAL HOLE |
| BQDM |
HOLE TYPE |
DRILLED |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| ANEE |
GRIP LENGTH |
0.562 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
1.516 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |