| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CRHC |
HOLE CONFIGURATION STYLE |
ROUND LONGITUDINAL HOLE |
| AASU |
HEAD HEIGHT |
0.276 INCHES NOMINAL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AAUB |
HOLE DIAMETER |
0.070 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 3140 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 3135 OVERALL |
| AASL |
HEAD DIAMETER |
0.523 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| ASDB |
WIDTH ACROSS FLATS |
0.313 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.538 INCHES MINIMUM AND 0.588 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| BQDM |
HOLE TYPE |
DRILLED |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES MINIMUM FIRST HOLE AND 0.081 INCHES MAXIMUM FIRST HOLE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| ASXK |
HOLE QUANTITY |
6 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.443 INCHES MINIMUM FIRST HOLE AND 1.463 INCHES MAXIMUM FIRST HOLE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS145 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |