| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| CRHC |
HOLE CONFIGURATION STYLE |
ROUND LONGITUDINAL HOLE |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| CQHQ |
MINIMUM YIELD STRENGTH |
155000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| CQFM |
HARDNESS RATING |
38.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| MATT |
MATERIAL |
STEEL OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASL |
HEAD DIAMETER |
0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASA |
THREAD LENGTH |
0.875 INCHES MINIMUM |
| AASB |
FASTENER LENGTH |
1.210 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| ASDB |
WIDTH ACROSS FLATS |
0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.047 INCHES NOMINAL |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| BQDM |
HOLE TYPE |
DRILLED |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| ASXK |
HOLE QUANTITY |
6 |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AASU |
HEAD HEIGHT |
0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |