| ANEE |
GRIP LENGTH |
2.052 INCHES MINIMUM AND 2.072 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.537 INCHES MINIMUM AND 0.604 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.131 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE |
| AASB |
FASTENER LENGTH |
2.609 INCHES MINIMUM AND 2.656 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AATB |
WIDTH BETWEEN FLATS |
1.052 INCHES MINIMUM AND 1.065 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
PPS 3306 FSCM 71867 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| MATT |
MATERIAL |
STEEL COMP 6150 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| AASK |
HEAD STYLE |
HEXAGON |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.427 INCHES MINIMUM FIRST HOLE AND 2.447 INCHES MAXIMUM FIRST HOLE |
| AAUR |
GRIP DIAMETER |
0.7485 INCHES MINIMUM AND 0.7488 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
NICKEL OVERALL |