| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AAVZ |
GROOVE DIAMETER |
0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING OVERALL |
| AAJD |
THREAD CLASS |
3A |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL |
| AASU |
HEAD HEIGHT |
0.093 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
BUTTON |
| AASA |
THREAD LENGTH |
0.281 INCHES MINIMUM |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.171 INCHES MINIMUM FIRST HOLE AND 1.203 INCHES MAXIMUM FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASL |
HEAD DIAMETER |
0.350 INCHES NOMINAL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AASB |
FASTENER LENGTH |
1.343 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |