| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| AASU |
HEAD HEIGHT |
0.338 INCHES MINIMUM AND 0.358 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| AATD |
EXTENDED WASHER THICKNESS |
0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AATC |
EXTENDED WASHER DIAMETER |
0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CRHC |
HOLE CONFIGURATION STYLE |
DOUBLE HEXAGON FLATS |
| AASB |
FASTENER LENGTH |
1.307 INCHES MINIMUM AND 1.337 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8735 OVERALL |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS625 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ASXK |
HOLE QUANTITY |
4 |
| BQDM |
HOLE TYPE |
DRILLED |
| AAUB |
HOLE DIAMETER |
0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| AATB |
WIDTH BETWEEN FLATS |
0.368 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.547 INCHES MINIMUM AND 0.597 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DOUBLE HEXAGON EXTENDED WASHER |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| ANEE |
GRIP LENGTH |
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |