| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CQBC |
MINIMUM TENSILE STRENGTH |
16000 POUNDS PER SQUARE INCH |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CQFM |
HARDNESS RATING |
51.0 ROCKWELL C MINIMUM OVERALL AND 53.0 ROCKWELL C MAXIMUM OVERALL |
| AAUR |
GRIP DIAMETER |
0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
NICKEL OVERALL AND CADMIUM OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| ANEE |
GRIP LENGTH |
0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AASB |
FASTENER LENGTH |
1.471 INCHES MINIMUM AND 1.501 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.309 INCHES MINIMUM AND 0.329 INCHES MAXIMUM |
| AATB |
WIDTH BETWEEN FLATS |
0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MATT |
MATERIAL |
STEEL OVERALL |
| CRHC |
HOLE CONFIGURATION STYLE |
DOUBLE HEXAGON LONGITUDINAL HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAUB |
HOLE DIAMETER |
0.055 INCHES NOMINAL |
| AATD |
EXTENDED WASHER THICKNESS |
0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AATC |
EXTENDED WASHER DIAMETER |
0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| ASXK |
HOLE QUANTITY |
4 |
| BQDM |
HOLE TYPE |
DRILLED |
| AASA |
THREAD LENGTH |
0.586 INCHES MINIMUM AND 0.636 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| AASK |
HEAD STYLE |
DOUBLE HEXAGON W/HOLE |