| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AAUR |
GRIP DIAMETER |
0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
5.575 INCHES MINIMUM FIRST HOLE AND 5.625 INCHES MAXIMUM FIRST HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AATB |
WIDTH BETWEEN FLATS |
0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| ANEE |
GRIP LENGTH |
5.302 INCHES MINIMUM AND 5.322 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81205-BACB30LC MANUFACTURERS STANDARD |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AASB |
FASTENER LENGTH |
5.766 INCHES MINIMUM AND 5.796 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |