| AASB |
FASTENER LENGTH |
2.812 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
27.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| AASA |
THREAD LENGTH |
0.750 INCHES MINIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| CQHQ |
MINIMUM YIELD STRENGTH |
105000 POUNDS PER SQUARE INCH |
| AAWE |
THIRD DIAMETER FROM HEAD |
0.535 INCHES NOMINAL |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.623 INCHES NOMINAL |
| AASL |
HEAD DIAMETER |
1.000 INCHES NOMINAL |
| AAWK |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER |
2.062 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AAJD |
THREAD CLASS |
3A |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
1.875 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
1 LOCKNUT FURNISED; BOTH ENDS CENTER DRILLED 0.250 IN. BY 0.261 IN. BY 60 DEG |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-890,ALLOY 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.125 INCHES NOMINAL |
| AASU |
HEAD HEIGHT |
0.312 INCHES NOMINAL |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
3 |
| AASK |
HEAD STYLE |
DEE CHAMFER |
| MATT |
MATERIAL |
STEEL OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASY |
DISTANCE FROM CENTERLINE TO FLAT |
0.375 INCHES NOMINAL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.562 INCHES NOMINAL |