| ANEE |
GRIP LENGTH |
2.500 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES NOMINAL FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1304 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ASXK |
HOLE QUANTITY |
3 |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.747 INCHES NOMINAL FIRST HOLE |
| AASU |
HEAD HEIGHT |
0.125 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON CORNERS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| AAUR |
GRIP DIAMETER |
0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| AASB |
FASTENER LENGTH |
2.925 INCHES NOMINAL |
| AATB |
WIDTH BETWEEN FLATS |
0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.046 INCHES NOMINAL |
| BQDM |
HOLE TYPE |
DRILLED |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AASA |
THREAD LENGTH |
0.425 INCHES MINIMUM |