| AATB |
WIDTH BETWEEN FLATS |
0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AATC |
EXTENDED WASHER DIAMETER |
0.938 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
WITH HEADER POINT 45 DEGREE BY 0.188 IN. LG |
| AAWK |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER |
1.768 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3A |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AATD |
EXTENDED WASHER THICKNESS |
0.125 INCHES NOMINAL |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.375 INCHES NOMINAL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASB |
FASTENER LENGTH |
5.831 INCHES MINIMUM AND 5.855 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
4 |
| MATT |
MATERIAL |
STEEL OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
1.500 INCHES NOMINAL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.559 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
1E60 FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AASU |
HEAD HEIGHT |
0.457 INCHES MINIMUM AND 0.481 INCHES MAXIMUM |
| AAWF |
FOURTH DIAMETER FROM HEAD |
0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
1.500 INCHES MINIMUM |
| AASK |
HEAD STYLE |
HEXAGON EXTENDED WASHER |
| AAWE |
THIRD DIAMETER FROM HEAD |
0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AAWL |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER |
4.812 INCHES NOMINAL |