| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AATX |
SHOULDER LENGTH |
1.325 INCHES MINIMUM FIRST SHOULDER AND 1.330 INCHES MAXIMUM FIRST SHOULDER |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-I-6868 SPECIFICATION |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATN |
SHOULDER DIAMETER |
0.5601 INCHES MINIMUM FIRST SHOULDER AND 0.5607 INCHES MAXIMUM FIRST SHOULDER |
| AAJD |
THREAD CLASS |
3A |
| CWYB |
SHOULDER SHAPE |
ROUND FIRST SHOULDER |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQBC |
MINIMUM TENSILE STRENGTH |
220000 POUNDS PER SQUARE INCH |
| AASU |
HEAD HEIGHT |
0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
G-1010,FSCM 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AASL |
HEAD DIAMETER |
0.938 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
46.0 ROCKWELL C MINIMUM OVERALL AND 49.0 ROCKWELL C MAXIMUM OVERALL |
| AASA |
THREAD LENGTH |
0.293 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| AATB |
WIDTH BETWEEN FLATS |
0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
ROUND W/WRENCH FLATS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-8837,TY 2 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.535 INCHES MINIMUM FIRST HOLE AND 1.540 INCHES MAXIMUM FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| AASB |
FASTENER LENGTH |
1.732 INCHES MINIMUM AND 1.737 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |