| CRHC |
HOLE CONFIGURATION STYLE |
ROUND LONGITUDINAL HOLE |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.197 INCHES MINIMUM AND 0.201 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AAJD |
THREAD CLASS |
3A |
| AATD |
EXTENDED WASHER THICKNESS |
0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AATC |
EXTENDED WASHER DIAMETER |
0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAUB |
HOLE DIAMETER |
0.062 INCHES NOMINAL |
| MATT |
MATERIAL |
IRON ALLOY 660 OVERALL |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
2 |
| AASA |
THREAD LENGTH |
0.413 INCHES MINIMUM |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.162 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
4 |
| AATB |
WIDTH BETWEEN FLATS |
0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| BQDM |
HOLE TYPE |
DRILLED |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.261 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.595 INCHES MINIMUM AND 0.615 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DOUBLE HEXAGON W/HOLE |