| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CQHQ |
MINIMUM YIELD STRENGTH |
85000 POUNDS PER SQUARE INCH |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.128 INCHES MINIMUM FIRST HOLE AND 2.140 INCHES MAXIMUM FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CQFM |
HARDNESS RATING |
24.0 ROCKWELL C MINIMUM OVERALL AND 35.0 ROCKWELL C MAXIMUM OVERALL |
| AASA |
THREAD LENGTH |
0.500 INCHES NOMINAL |
| AAUR |
GRIP DIAMETER |
0.6234 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AAJD |
THREAD CLASS |
3A |
| AASB |
FASTENER LENGTH |
2.297 INCHES MINIMUM AND 2.327 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.802 INCHES MINIMUM AND 1.822 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES MINIMUM FIRST HOLE AND 0.146 INCHES MAXIMUM FIRST HOLE |
| CQBC |
MINIMUM TENSILE STRENGTH |
130000 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MATT |
MATERIAL |
IRON ALLOY 660 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASK |
HEAD STYLE |
HEXAGON |
| AATB |
WIDTH BETWEEN FLATS |
0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASU |
HEAD HEIGHT |
0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |