| ANEE |
GRIP LENGTH |
2.052 INCHES MINIMUM AND 2.072 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| ASXK |
HOLE QUANTITY |
8 |
| AATC |
EXTENDED WASHER DIAMETER |
0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| AASA |
THREAD LENGTH |
0.594 INCHES MINIMUM AND 0.644 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AATD |
EXTENDED WASHER THICKNESS |
0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| CRHC |
HOLE CONFIGURATION STYLE |
DOUBLE HEXAGON LONGITUDINAL HOLE |
| AAUR |
GRIP DIAMETER |
0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| BQDM |
HOLE TYPE |
DRILLED |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| AASB |
FASTENER LENGTH |
2.666 INCHES MINIMUM AND 2.696 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 6150 OVERALL |
| AAUB |
HOLE DIAMETER |
0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DOUBLE HEXAGON EXTENDED WASHER |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |