| ANEE |
GRIP LENGTH |
0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.224 INCHES MINIMUM FIRST HOLE AND 1.256 INCHES MAXIMUM FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 6150 OVERALL |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AAJD |
THREAD CLASS |
3A |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES NOMINAL FIRST HOLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASA |
THREAD LENGTH |
0.459 INCHES MINIMUM AND 0.494 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AAWU |
SINGLE SHEAR STRENGTH |
29150 POUNDS PER SQUARE INCH |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASK |
HEAD STYLE |
HEXAGON |
| AATB |
WIDTH BETWEEN FLATS |
0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AASB |
FASTENER LENGTH |
1.407 INCHES MINIMUM AND 1.422 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |