| CMLP |
THREAD QUANTITY PER INCH |
24 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASU |
HEAD HEIGHT |
0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AASB |
FASTENER LENGTH |
1.189 INCHES MINIMUM AND 1.219 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AASA |
THREAD LENGTH |
0.454 INCHES NOMINAL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.011 INCHES MINIMUM FIRST HOLE AND 1.377 INCHES MAXIMUM FIRST HOLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| MATT |
MATERIAL |
STEEL OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000,4340 OR E4340 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS6206 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| ANEE |
GRIP LENGTH |
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |