| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| AASU |
HEAD HEIGHT |
0.219 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1307 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 6150 OVERALL |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES GRIP |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAUR |
GRIP DIAMETER |
0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.493 INCHES MINIMUM FIRST HOLE AND 1.543 INCHES MAXIMUM FIRST HOLE |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES BEARING SURFACE OF HEAD |
| AASA |
THREAD LENGTH |
0.569 INCHES MINIMUM AND 0.619 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| AASB |
FASTENER LENGTH |
1.704 INCHES MINIMUM AND 1.734 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.438 INCHES |
| ANEE |
GRIP LENGTH |
1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
20 |