| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| AASA |
THREAD LENGTH |
0.901 INCHES MINIMUM AND 0.951 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
1.223 INCHES MINIMUM AND 1.253 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| AAZH |
HEAD MINOR DIAMETER |
0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 6150 OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AATD |
EXTENDED WASHER THICKNESS |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AAJD |
THREAD CLASS |
3A |
| AASK |
HEAD STYLE |
SPLINE EXTENDED WASHER |
| AAUR |
GRIP DIAMETER |
0.6330 INCHES MINIMUM AND 0.6340 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.452 INCHES MINIMUM AND 0.492 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| AATC |
EXTENDED WASHER DIAMETER |
1.153 INCHES MINIMUM AND 1.163 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |