| AASU |
HEAD HEIGHT |
0.701 INCHES MINIMUM AND 0.721 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| FEAT |
SPECIAL FEATURES |
CHAMFER ON THD END 0.046 IN. MIN 0.078 IN. MAX AT 45 DEG ANGLE; INTERNAL CHAMFER ON THREAD END 0.187 IN. AT 60 DEG ANGLE |
| AATB |
WIDTH BETWEEN FLATS |
0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AATC |
EXTENDED WASHER DIAMETER |
1.220 INCHES MINIMUM AND 1.230 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 6150 OVERALL |
| ANEE |
GRIP LENGTH |
2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
1.036 INCHES MINIMUM AND 1.076 INCHES MAXIMUM |
| AATD |
EXTENDED WASHER THICKNESS |
0.168 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
3.171 INCHES MINIMUM AND 3.191 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AASK |
HEAD STYLE |
DOUBLE HEXAGON W/HOLE |