| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES HEAD |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AAUB |
HOLE DIAMETER |
0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AAJD |
THREAD CLASS |
3A |
| AASU |
HEAD HEIGHT |
0.312 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES GRIP |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE |
| ANEE |
GRIP LENGTH |
5.990 INCHES MINIMUM AND 6.010 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASA |
THREAD LENGTH |
0.902 INCHES NOMINAL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
6.575 INCHES MINIMUM FIRST HOLE AND 6.590 INCHES MAXIMUM FIRST HOLE |
| ASXK |
HOLE QUANTITY |
3 |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AAUR |
GRIP DIAMETER |
0.6226 INCHES MINIMUM AND 0.6232 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL OVERALL |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES BEARING SURFACE OF HEAD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-B-7838 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON CORNERS |
| AASB |
FASTENER LENGTH |
6.887 INCHES MINIMUM AND 6.917 INCHES MAXIMUM |
| AATB |
WIDTH BETWEEN FLATS |
0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| BQDM |
HOLE TYPE |
DRILLED |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |