| CMLP |
THREAD QUANTITY PER INCH |
24 |
| MATT |
MATERIAL |
STEEL COMP 431 OVERALL |
| CBBL |
FEATURES PROVIDED |
FINISHED HEAD |
| AASA |
THREAD LENGTH |
0.608 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ANEE |
GRIP LENGTH |
2.422 INCHES MINIMUM AND 2.454 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.860 INCHES MINIMUM FIRST HOLE AND 2.892 INCHES MAXIMUM FIRST HOLE |
| ASXK |
HOLE QUANTITY |
1 |
| AASB |
FASTENER LENGTH |
3.062 INCHES MINIMUM AND 3.109 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AASK |
HEAD STYLE |
HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| BQDM |
HOLE TYPE |
DRILLED |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |