| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.766 INCHES NOMINAL FIRST HOLE |
| MATT |
MATERIAL |
STEEL COMP 431 OVERALL |
| ANEE |
GRIP LENGTH |
0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.1889 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES GRIP |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AATB |
WIDTH BETWEEN FLATS |
0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| AAUB |
HOLE DIAMETER |
0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-S-6812 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AASK |
HEAD STYLE |
HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| BQDM |
HOLE TYPE |
DRILLED |
| AASA |
THREAD LENGTH |
0.374 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| AASB |
FASTENER LENGTH |
0.890 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AASU |
HEAD HEIGHT |
0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |