| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| AAUR |
GRIP DIAMETER |
0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| AASA |
THREAD LENGTH |
0.503 INCHES MINIMUM AND 0.553 INCHES MAXIMUM |
| AATB |
WIDTH BETWEEN FLATS |
0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS6208 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| ANEE |
GRIP LENGTH |
9.110 INCHES MINIMUM AND 9.140 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYII, CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.430 INCHES MINIMUM FIRST HOLE AND 1.480 INCHES MAXIMUM FIRST HOLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AASB |
FASTENER LENGTH |
9.638 INCHES MINIMUM AND 9.668 INCHES MAXIMUM |