| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.073 INCHES MINIMUM FIRST HOLE AND 0.088 INCHES MAXIMUM FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.899 INCHES MINIMUM FIRST HOLE AND 2.919 INCHES MAXIMUM FIRST HOLE |
| AASA |
THREAD LENGTH |
0.323 INCHES NOMINAL |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES SIDES OF HEAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CBBL |
FEATURES PROVIDED |
FINISHED HEAD |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| MATT |
MATERIAL |
STEEL COMP 4340 OVERALL OR STEEL COMP 8740 OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS6303 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AAUR |
GRIP DIAMETER |
0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TY2, CL2 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AASB |
FASTENER LENGTH |
2.933 INCHES MINIMUM AND 2.963 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| ANEE |
GRIP LENGTH |
2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM |