| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| CWDK |
POINT CHAMFER ANGLE |
43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| AAUY |
POINT LENGTH |
0.039 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| ANEE |
GRIP LENGTH |
0.062 INCHES NOMINAL |
| AASB |
FASTENER LENGTH |
0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABQJ |
POINT STYLE |
FLAT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.203 INCHES MINIMUM AND 0.233 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
3 |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AAUR |
GRIP DIAMETER |
0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON CORNERS |
| AAUB |
HOLE DIAMETER |
0.051 INCHES NOMINAL |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| BQDM |
HOLE TYPE |
DRILLED |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |