| ANEE |
GRIP LENGTH |
2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
C5 ACFT |
| AASU |
HEAD HEIGHT |
0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.934 INCHES MINIMUM FIRST HOLE AND 2.954 INCHES MAXIMUM FIRST HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS6415 ASSN STD 2ND MATERIAL RESPONSE OVERALL OR AMS6484 ASSN STD 2ND MATERIAL RESPONSE OVERALL OR AMS6349 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR AMS6322 ASSN STD 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| AASB |
FASTENER LENGTH |
3.151 INCHES MINIMUM AND 3.181 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AASA |
THREAD LENGTH |
0.641 INCHES MINIMUM AND 0.691 INCHES MAXIMUM |
| AATB |
WIDTH BETWEEN FLATS |
1.052 INCHES MINIMUM AND 1.065 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 8740 OVERALL |
| AAUR |
GRIP DIAMETER |
0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 3,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |