| AASB |
FASTENER LENGTH |
1.890 INCHES MINIMUM AND 1.937 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.940 INCHES MINIMUM ALL HOLES AND 0.950 INCHES MAXIMUM ALL HOLES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING OVERALL |
| ANEE |
GRIP LENGTH |
0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.172 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3A |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.070 INCHES MINIMUM ALL HOLES AND 0.080 INCHES MAXIMUM ALL HOLES |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT-FULL THREADED, 160 KSI STEEL, DRILLED HEAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAUR |
GRIP DIAMETER |
0.167 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
3 |
| AATB |
WIDTH BETWEEN FLATS |
0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
1.920 INCHES MINIMUM AND 1.997 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| BQDM |
HOLE TYPE |
DRILLED |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |