| AATB |
WIDTH BETWEEN FLATS |
0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AASB |
FASTENER LENGTH |
6.035 INCHES MINIMUM AND 6.065 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES NOMINAL FIRST HOLE |
| AASU |
HEAD HEIGHT |
0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| ANEE |
GRIP LENGTH |
5.625 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 8740 OVERALL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
5.872 INCHES NOMINAL FIRST HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL AND AMS6415 ASSN STD 2ND MATERIAL RESPONSE OVERALL AND MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| AASA |
THREAD LENGTH |
0.425 INCHES NOMINAL |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE II CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUR |
GRIP DIAMETER |
0.244 INCHES MINIMUM AND 0.245 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |