| AASA |
THREAD LENGTH |
0.295 INCHES MINIMUM STUD THREAD AND 0.325 INCHES MAXIMUM STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
28 STUD THREAD |
| ADCU |
DISTANCE FROM SERRATED PORTION TO STUD END |
0.455 INCHES MAXIMUM |
| ADDW |
SERRATION QUANTITY |
13 |
| CWKL |
SERRATION INCLUDED ANGLE |
102.0 DEGREES NOMINAL |
| ADCV |
DISTANCE FROM SHOULDER PORTION TO NUT END |
0.425 INCHES MINIMUM |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES NUT THD |
| STYL |
STYLE DESIGNATOR |
LOCKED IN |
| AAJD |
THREAD CLASS |
3A NUT THREAD |
| ADDU |
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.105 INCHES MINIMUM FIRST HOLE |
| ADDV |
COTTER PIN HOLE DIAMETER |
0.070 INCHES NOMINAL FIRST HOLE |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES STUD THREAD |
| AAUM |
LOCKING FEATURE |
RING, LOCK SERRATED |
| AASA |
THREAD LENGTH |
0.425 INCHES MINIMUM NUT THREAD AND 0.455 INCHES MAXIMUM NUT THREAD |
| ADDU |
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.135 INCHES MAXIMUM SECOND HOLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5734 ASSN STD SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL |
| ADCT |
DISTANCE FROM SERRATED PORTION TO NUT END |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND STUD THREAD |
| ABHP |
OVERALL LENGTH |
0.910 INCHES MINIMUM AND 0.970 INCHES MAXIMUM |
| AAJE |
THREAD PITCH DIAMETERS |
+0.2281/+0.2296 INCHES STUD THREAD |
| ADCX |
DISTANCE FROM SERRATED PORTION TO END OF STUD THREAD |
0.100 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNS STUD THREAD |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |