| CQFM |
HARDNESS RATING |
24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| AAJE |
THREAD PITCH DIAMETERS |
+0.4037/+0.4060 INCHES STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
14 STUD THREAD |
| FEAT |
SPECIAL FEATURES |
STUD END THREAD 0.008 IN. OVERSIZE |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES NUT THREAD |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES STUD THREAD |
| ADDV |
COTTER PIN HOLE DIAMETER |
0.107 INCHES MINIMUM FIRST HOLE AND 0.112 INCHES MAXIMUM FIRST HOLE |
| AASA |
THREAD LENGTH |
0.920 INCHES MINIMUM STUD THREAD AND 1.020 INCHES MAXIMUM STUD THREAD |
| AAJD |
THREAD CLASS |
3A NUT THREAD |
| AASA |
THREAD LENGTH |
0.580 INCHES MINIMUM NUT THREAD AND 0.680 INCHES MAXIMUM NUT THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| MATT |
MATERIAL |
STEEL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF NUT THREAD |
| ABHP |
OVERALL LENGTH |
1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND STUD THREAD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 7456 ASSN STD SINGLE MATERIAL RESPONSE |
| THSD |
THREAD SERIES DESIGNATOR |
UNS STUD THREAD |
| ADDU |
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.130 INCHES MINIMUM FIRST HOLE AND 0.150 INCHES MAXIMUM FIRST HOLE |
| CMLP |
THREAD QUANTITY PER INCH |
20 NUT THREAD |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |