| ADDV |
COTTER PIN HOLE DIAMETER |
0.074 INCHES MINIMUM FIRST HOLE AND 0.081 INCHES MAXIMUM FIRST HOLE |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES NUT THREAD |
| ABHP |
OVERALL LENGTH |
2.000 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES STUD THREAD |
| MATT |
MATERIAL |
STEEL OR STEEL COMP 8735 OR STEEL COMP 8740 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF NUT THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
28 NUT THREAD |
| AASA |
THREAD LENGTH |
0.755 INCHES MINIMUM STUD THREAD AND 0.805 INCHES MAXIMUM STUD THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNC STUD THREAD |
| ADDU |
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.090 INCHES NOMINAL FIRST HOLE |
| AASA |
THREAD LENGTH |
0.702 INCHES MINIMUM NUT THREAD AND 0.738 INCHES MAXIMUM NUT THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
20 STUD THREAD |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND STUD THREAD |
| AAJE |
THREAD PITCH DIAMETERS |
+0.2208/+0.2221 INCHES STUD THREAD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6320 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 3RD MATERIAL RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |