| MATT |
MATERIAL |
STEEL COMP 8735 |
| ADDU |
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.084 INCHES MINIMUM FIRST HOLE AND 0.104 INCHES MAXIMUM FIRST HOLE |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES NUT THREAD |
| AAJD |
THREAD CLASS |
3A NUT THREAD |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES STUD THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| AAJE |
THREAD PITCH DIAMETERS |
+0.2290/+0.2314 INCHES STUD THREAD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF NUT THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
28 NUT THREAD |
| AASA |
THREAD LENGTH |
0.678 INCHES MINIMUM STUD THREAD AND 0.780 INCHES MAXIMUM STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
20 STUD THREAD |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES SHANK |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND STUD THREAD |
| AASA |
THREAD LENGTH |
0.490 INCHES MINIMUM NUT THREAD AND 0.560 INCHES MAXIMUM NUT THREAD |
| CQFM |
HARDNESS RATING |
29.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| ADDV |
COTTER PIN HOLE DIAMETER |
0.068 INCHES MINIMUM FIRST HOLE AND 0.088 INCHES MAXIMUM FIRST HOLE |
| ABHP |
OVERALL LENGTH |
2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNS STUD THREAD |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |