| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE ASSN STD SINGLE MATERIAL RESPONSE |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES NUT THREAD |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES STUD THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| AASA |
THREAD LENGTH |
0.530 INCHES MINIMUM STUD THREAD |
| AASA |
THREAD LENGTH |
0.410 INCHES MINIMUM NUT THREAD |
| CQFM |
HARDNESS RATING |
28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF NUT THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
28 NUT THREAD |
| AAJE |
THREAD PITCH DIAMETERS |
+0.2308/+0.2323 INCHES STUD THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNC STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
20 STUD THREAD |
| ABHP |
OVERALL LENGTH |
1.000 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND STUD THREAD |
| ADDU |
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.110 INCHES NOMINAL FIRST HOLE |
| MATT |
MATERIAL |
STEEL COMP 4140 |
| ADDV |
COTTER PIN HOLE DIAMETER |
0.065 INCHES MINIMUM FIRST HOLE AND 0.072 INCHES MAXIMUM FIRST HOLE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |