| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6382 ASSN STD SINGLE MATERIAL RESPONSE |
| ABHP |
OVERALL LENGTH |
1.750 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES NUT THREAD |
| AAJD |
THREAD CLASS |
3A NUT THREAD |
| ADDU |
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
1.640 INCHES NOMINAL SECOND HOLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
16 STUD THREAD |
| CQFM |
HARDNESS RATING |
28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF NUT THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNC STUD THREAD |
| AASA |
THREAD LENGTH |
0.810 INCHES MINIMUM NUT THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND STUD THREAD |
| ADDU |
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.110 INCHES NOMINAL FIRST HOLE |
| AAJE |
THREAD PITCH DIAMETERS |
+0.3452/+0.3467 INCHES STUD THREAD |
| MATT |
MATERIAL |
STEEL COMP 4140 |
| ADDV |
COTTER PIN HOLE DIAMETER |
0.065 INCHES MINIMUM FIRST HOLE AND 0.072 INCHES MAXIMUM FIRST HOLE |
| AASA |
THREAD LENGTH |
0.780 INCHES MINIMUM STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
24 NUT THREAD |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES STUD THREAD |