| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES STUD THREAD |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE ZINC OVERALL |
| ABHP |
OVERALL LENGTH |
2.500 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
STUD,DOUBLE END,.750-10 UNC |
| MATT |
MATERIAL |
STEEL COMP 1213 |
| AAJD |
THREAD CLASS |
2A NUT THREAD |
| AAJE |
THREAD PITCH DIAMETERS |
+0.6773/+0.6832 INCHES NUT THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
10 STUD THREAD |
| AAJE |
THREAD PITCH DIAMETERS |
+0.6882/+0.6915 INCHES STUD THREAD |
| SUPP |
SUPPLEMENTARY FEATURES |
TAP END CHAMFERED; NUT END FLAT AND CHAMFERED OR OVAL; TAP END TO HAVE THREAD SEALANT, LOCTITE NO. 513 PRE-APPLIED (NO SEALANT ON FIRST 1-2 THREADS) |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
AAJE |
| AAJD |
THREAD CLASS |
5A STUD THREAD |
| AASA |
THREAD LENGTH |
1.120 INCHES MINIMUM NUT THREAD AND 1.240 INCHES MAXIMUM NUT THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
10 NUT THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNC STUD THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND STUD THREAD |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES NUT THREAD |
| AASA |
THREAD LENGTH |
0.753 INCHES MINIMUM STUD THREAD AND 0.813 INCHES MAXIMUM STUD THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNC NUT THREAD |
| AGAV |
END ITEM IDENTIFICATION |
USED ON 93016H4100 & 93016C4100; END ITEM IS FUEL PUMP, 600 GPM (FU604G) 4930-01-392-7579 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ASTM B633 TYPE IV, SC1 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE 1113 CRS, OR EQUAL ASSN STD SINGLE MATERIAL RESPONSE |