| ADEB |
PLATE THICKNESS |
0.080 INCHES NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS500 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ADFP |
NUT MOUNTING PROVISION |
COUNTERSUNK HOLES |
| ADAZ |
THRU-HOLE DIAMETER |
0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 316 OVERALL OR STEEL CORROSION RESISTING OVERALL |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.341 INCHES MINIMUM AND 0.347 INCHES MAXIMUM |
| ACTA |
NUT STYLE |
PLATE NUT SPACER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6721 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| ACVN |
NUT LENGTH |
0.969 INCHES NOMINAL |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFR |
MOUNTING PROVISION LOCATION |
OPPOSITE NUT PROJECTION SIDE |
| ADEC |
PLATE WIDTH |
0.438 INCHES NOMINAL |
| ABTB |
MOUNTING HOLE DIAMETER |
0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM |
| CSSM |
MOUNTING HOLE COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |