| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
4.000 INCHES |
| ALET |
HOLE TYPE AND QUANTITY |
6 DRILLED |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
26512-GN10FM MANUFACTURERS STANDARD |
| ADBG |
NUT THICKNESS |
0.328 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| ABQU |
DRIVE POINT DEPTH |
0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/9 TEMPER T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ADBM |
DRIVE POINT QUANTITY |
2 |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CRHC |
HOLE CONFIGURATION STYLE |
CONFIGURATION J |
| CRSQ |
COUNTERSINK ANGLE |
90.0 DEGREES NOMINAL NUT |
| ACTD |
NUT DIAMETER |
4.484 INCHES MINIMUM AND 4.516 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3B |
| AZKQ |
TEMP RATING |
NOT RATED |
| BZRR |
THREAD SERIES |
UNJ |
| ADBH |
DRIVE POINT WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| ACTA |
NUT STYLE |
ROUND |
| AGGP |
DRILLED HOLE DIAMETER |
0.045 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 OVERALL |