| CQFM |
HARDNESS RATING |
24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| ADEC |
PLATE WIDTH |
0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| ADEB |
PLATE THICKNESS |
0.055 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| ADEA |
NUT HEIGHT |
0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
0.976 INCHES MINIMUM AND 1.006 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| CRSQ |
COUNTERSINK ANGLE |
85.0 DEGREES MINIMUM NUT AND 95.0 DEGREES MAXIMUM NUT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5024 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ACTA |
NUT STYLE |
PLATE |
| AAJD |
THREAD CLASS |
3B |
| AZKQ |
TEMP RATING |
NOT RATED |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 1137 OVERALL |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| BZRR |
THREAD SERIES |
UNJF |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |